VLR-15 Turn Signal Plug-N-Play Hyperflash Fix
VLR-15 Turn Signal Plug-N-Play Hyperflash Fix - Sold in pair
Exclusive: The VLR is by far the cleanest and safest way to add load to any vehicle lighting system. VLR resistors accomplish the same task as a common gold resistor but are easier to install, have a lower profile, and run 50% cooler (250°F MAX).
Construction: Using a wire wound resistor potted inside of a black anodized aluminum heat sink, these are the most weatherproof and thermally safe resistors on the market. VLR resistors use high temp silicone wiring attached to a male waterproof circular connector.
Mounting: The supplied VLR High Temp mounting tape can be used to adhere the resistor body to a flat, clean metal surface on the vehicle. As an extra precaution: VLR resistors should be mounted out of harm's way and should not touch any plastic or other wiring.
For hardwiring installations, we highly recommended this for a serviceable connection! Using the DuoTap connector, insert both positive and negative wires and squeeze DuoTaps with pliers. It's that easy!
Included:
2x VLR-15 Resistor
2x 3M Mounting Tape
✔ Plug N' Play: Install the inline adapter between factory bulb connector and new input connector (harness, LED, etc.).
✔ Waterproof: Fully potted and uses waterproof connectors
✔ Mounting: Can be installed with included high temp mounting tape or screws
✔ Safer Temperature: Max Temp = 250°F (121°C)
✔ Current Draw @ 14.4V: 1.0A
✔ Operating Voltage: 1-18V
✔ Wire Type: PVC 80° C
✔ Finish Type: Anodized
✔ Dimensions: 45mm x 40mm x 12mm
✔ Material: 6061 Aluminum
✔ Wire Length: 250mm (10")
✔ Contact Material: Gold Plated
✔ Resistor Value: 15 Ohm
✔ Mounting: High Temp Tape
✔ Plug Connection Style: 2 Pin Waterproof Plug (WP)
✔ Electrical Connection: System Connect
✔ Load Equivalent: 1 Turn Signal Bulb w/ V6 Extreme
✔ Temperature (Continuous): 250° F
✔ Temperature (Momentary): 150° F
