
Front: ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks are an incredible upgrade for the front end of the 2024+ Toyota Tacoma. These adjustable coilovers allow up 1.25-3” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving, their large 2.5” shock body with increased piston surface area over stock components, and their pairing with an ICON front differential drop (4WD only), yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle.
Rear: ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are fully rebuildable and re-tunable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061-billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle.
Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Fitment: 2024+ Toyota Tacoma ✔
Please Note:
➜ Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range.
➜ Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles.
➜ Will not fit Tacoma submodels equipped with rear leaf springs.
Front:
Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock.
Vehicle specific shock length and pairing with front differential drop yields maximum wheel travel.
Height-adjustable coilovers offer 1.25-3" of lift height adjustment over stock.
2.5" diameter shock bodies with remote reservoirs.
Remote reservoirs maintain cooler operating temperatures during extended off-road use.
ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC).
ICON engineered coil springs.
6061 Aircraft grade aluminum CNC machined components.
Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts.
FK rod end bearings for extended longevity and minimal deflection.
Fully rebuildable and re-tunable.
Rear:
ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression.
Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use.
One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish.
Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range.
Nitrogen charged monotube design with remote reservoir.
ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC).
One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road.
7/8” diameter induction hardened, chrome plated shock shaft.
Rubber dust boot included for added shaft protection.
PTFE lined spherical bearings and application specific mounting hardware.
6061 aircraft grade aluminum CNC machined components.
Fully rebuildable and re-tunable.
Front:
Weight: 61.00 Pounds
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5 with 5.75” Backspace / 25mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 18x9 with 6.00” Backspace / 25mm Offset
Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.)
Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.
Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install.
4WD models require front differential drop part # 55160.
An iOS operated device is required to run ICON Intelligent Control App.
ICON Delta Joint Pro front upper control arms are recommended to maintain proper wheel alignment above 2" of lift.
Also requires installation of IIC kit (Part # 53509) and CDEV rear shocks (Part # 57808EP).
Rear:
Weight: 32.00 Pounds
Shocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.
An iOS operated device is required to run ICON Intelligent Control App.
Also requires installation of IIC kit (Part # 53509) and CDEV front coilovers (Part # 58780E).
Compatible with 0-1” of rear lift over stock.
➜ Limited-Lifetime-Warranty.
Explore our latest articles, guides, and insights to help you stay informed and inspired.