$ 409.99

Share this product on:

40" Super Stealth Combo Beam Led Light Bar

Our Super Stealth LED light bars are a perfect option for those looking for a discreet yet powerful light. These bars maintain all the benefits of our other light bars while adding the benefit of a sleeker look. Gone are the days of having an obvious light bar on your roof/bumper. The Super Stealth series blends in with your vehicle better, creating a smooth, compact look.

Our Super Stealth LED light bars are perfect for your next off-roading adventure. No matter if you're on a hunting trip, working on a remote site, or just off on a mudding run, you can count on our light bar to illuminate the way.

With high-quality aluminum construction, IP67/68 rating to keep dust and water out, and rugged powder coating, our lights will take you wherever your journey may take you and whatever abuse you throw at it.

Includes:
LED Light Bar
✔ Side mounting brackets AND movable bottom mounts (bottom mounts can be removed with an allen wrench)

PLEASE NOTE: Does Not Include Wiring Harness. See Related Products section for the correct harness.

 

ADDITIONALS

➤ You can add a Universal Wireless Remote Controller with strobe patterns.

Control your lights with a keyfob rather than a switch (or have the option for both).

This multi function wireless remote system allows you to control your LED light(s) from the wireless key fob. Not only can you turn your lights on and off, but you can turn your lights into a strobe light, with different strobe flash patterns. This remote has a receiver that will fit into our DT or ATP harnesses.

Functions
✔ On/off model
✔ 7-9 flash patterns
✔ SOS emergency mode

Instructions
✔ Key A: Turn on/off.
✔ Key B: Go to next flash pattern (Key A needs to be “ON”).
✔ Key C: Go to previous flash pattern (Key A needs to be “ON”).
✔ Key D: SOS Exclusive mode. Flashes 3 short pulses followed by 3 long pulses: the international HELP/SOS pattern.

Please note: The wireless remote controls strobing patterns and on/off functions. The colors are controlled via the app.

➤ You can add a Wiring Harness

The perfect harness for your lightbar setup. 

Make your install a snap with our plug-and-play harness. The brass grommets on the positive and negative terminals make connecting to the battery or accessory post a snap. Each harness comes with an inline fuse, a relay, and a switch.

This wiring harness and switch makes wiring up your new lights a snap. Comes with everything you need. Just hook up the red wire lead to the battery and the black to a ground, then plug in the light and click the switch and your lighting up the night!

✔ Has 1 plugs to control up to one light.
✔ Uses DT style, waterproof plugs.

Please note: This option has 1 DT plugs to control 1 light from a single switch.

➤ You can add a Rocker Switch

Swap out your factory switch with our easy to install Rocker Switches.

These two position rocker switches allow you to control your LED light(s) with style. Choose from multiple different laser engravings.

✔ 12V 20 Amp switch.
✔ 5 Pin switch is SPST (Single Pole Single Throw) and can be integrated in dash/rocker lighting to control the illumination of the writing, the lettering is illuminated at all times.
✔ Switches are 1.75" tall and 1" wide
✔ Replaces our factory switch on any and all of our harnesses.

40" Super Stealth Combo Beam Led Light Bar Features

✔ Spot and Flood Combo Beam
✔ 22,950 lumens
✔ Sleek Design with Black Lenses
✔ Side Brackets & Movable Bottom Bracket
✔ 18 - 15w LEDs
✔ Waterproof

40" Super Stealth Combo Beam Led Light Bar Specs

Beam Configuration: Combo (Both Flood and Spot)
Harness Included: No
Beam Color: White
Width (In): 40
Lumens: 22,950
Number Of LEDs: 18
Power Of Each LED (Watts): 15
Total Power Input (Watts): 270
Input Voltage Range: 9 - 32 volts
Amp Draw (@ 12V): 22.5
Electronics: Integrated-Epoxy Encapsulated
Waterproof: IP67 Rated - 3 feet for 30 Minutes
Life Expectancy Hours: 50,000
Operating Temperature: -40°F to +140°F
Color Temperature: 6000k
Housing Color: Black
Lens Material: Polycarbonate (Lexan)
Mounting Brackets: Die-Cast Aluminum
Inner Locking Connector: DT (Deutsch Connector)
Case Quantity: 4

Warranty: Lifetime Warranty
We are so confident in the quality of our products that we provide a lifetime warranty to protect against manufacturing defects. Continue reading for details on our limited lifetime warranty.
Our products that say "Lifetime Warranty" in the product description are covered from material or manufacturer defects, impacting the function of the light, for the life of the original purchaser. The products that carry this warranty are typically all of our lights and some other accessories (but not all). This warranty does NOT cover normal wear and tear, cosmetic damages, disassembly, unauthorized repair or attempt, or damage due to abusive use. Disassembly includes unscrewing parts of the light bar, the light bars are treated for protection from water and by disassembling you may damage the bar. 
If for any reason you need to disassemble the bar, contact us first to confirm it will not damage anything. Simply contact us and we will arrange to either fix or replace the light, if available, or we will credit you toward your next purchase if the lights are no longer carried.

Return Policy: 30-day Return Guarantee
If for any reason you are not completely satisfied in the first 30 days of receiving any of our LED lights, simply return the product and as soon as we receive it, we'll process a refund for the product price excluding shipping to your delivery address.
Some of our products are offered with free shipping, so please note that if you return one of these products, our actual outbound shipping will be deducted from your return refund.
This is a period for you to evaluate the lights by simply plugging them in and testing that they will meet your needs, they should not be installed. To qualify for this return, the lights must meet the following conditions:
✔ Must be in original packaging and properly packaged (do not write on the box)
✔ Must include all parts and hardware received with your original shipment
✔ Must be unused and have no signs of usage
If items are returned without original packaging, hardware, wiring, or any other necessary parts for operation or installation, a minimum 15% restocking fee will be applied as well as any costs of damaged or missing parts. Products that have been installed or show visible use do not qualify for a return.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
img

Added to cart successfully!