This Tacoma bed rack system from Toyota will ensure you show up ready for anything. The Tacoma bed rack is compatible with Toyotas from 2005-2022 (3rd Gen) and with its low profile, multiple mounting, and tie-down points, there is literally nothing this bed rack can’t handle. Engineered by American designers and laser cut here in the USA, this bed rack is press broke and welded to perfection, providing a seamless fit without sacrificing quality. Allowing you to take all your gear on your next overland trip.

To protect from corrosion, these are professionally powder-coated in a durable black semi-gloss mini texture to defend against damage and corrosion. With 80% of the construction being aluminum, this translates into a lightweight, incredibly sturdy, and low maintenance.

Choose from our different height options and bed lengths.

• 7” - Short
• 10” - Mid
• 17.5” - Tall

The added payload means you can mount your Roof Top Tent, Rotopax, tools, recovery gear, and more. It also utilizes our unique T-slot design, allowing for endless mounting possibilities.

Features

• Easy to install. Read the Installation Instructions.
• Powder-coated with a durable black semi-gloss mini texture.
• Rated to exceed the weight limits of nearly any tent on the market.
• Lightweight (only weighs 55lbs).
• Varying Height Options Available.

WEIGHT LIMIT

Approximate weight capacity ~1,100lbs

See report on extrusion bars weight limit performance. This provides all the technical data for the extrusion which is the "weakest link" in the bed rack, though they are not weak at all! Running the simulation for 1000lbs on a 53" extrusion supported on each end. Our bed rack mounts them in the Deflection Y configuration. This is 1000lbs applied to a single bar at the weakest point in the center and it shows a deflection of 0.195" and no failure.

We do not have a full analysis of our bed rack ran through a simulation at this time, however, you can see that our rack can handle quite a bit of weight. Many customers run a large RTT up top with hi lifts or gas or recovery boards along the sides along with 360 degrees of lighting. 

DEFLECTION REPORT