2016-2023 Tacoma TVS1900 Supercharger System | 3.5L V6
2016-2023 Tacoma TVS1900 Supercharger System | 3.5L V6
2016-2023 Tacoma TVS1900 Supercharger System | 3.5L V6
2016-2023 Tacoma TVS1900 Supercharger System | 3.5L V6
2016-2023 Tacoma TVS1900 Supercharger System | 3.5L V6
2016-2023 Tacoma TVS1900 Supercharger System | 3.5L V6

2016-2023 Tacoma TVS1900 Supercharger System | 3.5L V6

Regular price$ 7,195.00
/


Magnuson’s Toyota Tacoma TVS1900 Supercharger System is designed exclusively for 2016 - 2023 model years, equipped with the 3.5L 2GR-FKS V6 engine. By carefully matching a TVS1900 supercharger to the 3.5L 2GR-FKS, Magnuson engineers have developed a direct bolt on system that delivers V8 level horsepower at a reasonable price.

In stock trim with no other system modifications, this kit delivers 5-6psi for 370+ hp and 330+ ft-lbs of torque at the crank, equivalent to ~308hp and ~275ft-lbs of torque to the rear wheels. That’s 32% more power than the stock V6!!!

Engineered to be robust, system incorporates High-thermal transfer intercooler for maximum aircharge cooling, yielding super low inlet air temps for consistent power from startup to shut down and to abate belt slip even under extreme conditions of 4-wheeling, the TVS1900 boasts a custom engineered supercharger belt-drive system for worry-free driving both on and off-road.

This system was developed to be a direct bolt on kit with minimal downtime, and straightforward installation. An enthusiast with basic tools can install the system in a weekend, or about a day for an experienced installer. In addition, a Magnuson calibration is included so the ‘tuning’ is already done for you. The TVS1900 also looks and fits like OEM, almost like it belongs there. With no cutting or welding, it’s also easily reverted to stock. The supercharger itself is maintenance free- pre-filled and sealed, nothing to check or top off for the lifetime of the engine.

Fitment: Available for all 2016-2023 Toyota Tacoma's including stock and modified vehicles. 

Please Note :
CARB Certification has been approved for the 2016-2021 Toyota Tacoma.
Calibration available for stock or modified vehicles. Modifications must be documented when submitting the Calibration File Form to Magnuson. For extreme builds, please contact our Sales Department to verify suitability for tuning in advance of purchasing kit.
NOTE TO CUSTOMERS WITH MODIFIED VEHICLES: The Magnuson calibration included with this kit is intended to work on stock vehicle configurations, including stock trim levels and stock OEM vehicle options. Modifications to your stock vehicle including, but not limited to, engine, flywheel, clutch, torque converter, transmission, wheels, tires, axles, gears, driveshafts, induction system, exhaust system and additional weight (ie. bumpers, racks, etc.) can have a significant impact on your vehicle’s calibration and may require modifications to our calibration as supplied. While we attempt to minimize the need for modifications during our development process, it is impossible for our team to account for all possible build variations/combinations, and in some cases it may be necessary for you to supply an additional element of customization for your vehicle—custom calibration—and to work, at your own direction and expense, with a local service facility to address your unique combination of hardware and make calibration adjustments as necessary. Please be aware that standard product warranties and governmental emissions certifications are predicated on stock vehicle configurations, and vehicle modifications and calibration changes may affect or even void powertrain warranty and emissions certification status (such as CARB emissions certification). It is the sole responsibility of the customer making a warranty claim to prove that any vehicle modifications and calibration changes were within warranty. It also is the sole responsibility of the customer to determine if the modifications and changes comply with all local, state and federal emissions standard.

Installation Guide:

Toyota Tacoma 3.5L Supercharger Installation Guide Here

Toyota Tacoma 3.5L Tuning Instructions Here

Positive displacement Roots design with OEM-level durability
Roots type blower provides instant torque even down low
Instant Response – No Turbo Lag
Over 370 hp / 330 ft-lbs @ crank
Robust Cooling Keeps IATs Consistent for All Day Power
Custom engineered supercharger belt-drive system for worry-free driving both on and off-road
Direct bolt-on installation with OEM look, fit and finish
Maintenance Free Design – Nothing to fill or oil to change
Includes calibration
CARB EO# - D-488-59

  • Large capacity front inlet/front-drive TVS1900 Supercharger assembly
  • Positive displacement Roots-type design using Eaton TVS Technology with proven OEM durability
  • Integrated vacuum bypass for instant boost response at low engine speeds
  • Exceptional vehicle performance with over 373HP and 332ft-lbs of torque at the crank (~308 RWHP)
  • High-efficiency intercooler system for maximum charge air cooling and sustainable performance
  • Custom engineered supercharger belt-drive system for worry-free driving both on and off-road
  • Waterproof intercooler pump for reliable performance in wet conditions
  • Full bolt-on installation with OEM look, fit and finish
  • Proven maintenance-free supercharger technology. No added complexity of external supercharger oil cooler/heaters for extreme climates.
  • Includes calibration, CARB EO# - Pending

➜ 3-Year-Limited-Warranty
With decades of OEM supply experience, Magnuson Superchargers proudly stands behind its industry-leading product reliability and is now offering a Limited Power Train Warranty for our supercharger systems. Best of all its FREE with our Standard 3 Year / 36,000 Mile warranty program!
More Info Here

Please note, returns or cancellations requested 3 days after purchase order will incur a 15% restocking/cancellation fee

Proposition 65 California