2005-2023 Toyota Tacoma Tubular Upper Control Arm Kit
Pairs well with
AccuTune Offroad Upper Control arm for 2005-2023 Toyota Tacomas is designed to fit larger tires and longer shocks, while maintaining proper alignment. Tubular steel design looks great with high quality powder coat finish. FK Rod ends are sealed to keep dirt and debris from premature wear and noise. Heim joints come pre-set and ready to install.
Fitment:
✔ AccuTune Off-Road Control Arms have been designed to work with standard or extended travel coilovers. Maximum shock extended length is 22.6”, measured from underneath the OEM frame mount to center of the lower shock mount. This includes any spacers. These Upper Control arms are not designed to be used with a Long Travel Kit, Drop Bracket Lift or spindle lift. Warranty void with aftermarket lower control arms. Many aftermarket lower control arms move the shock mount to wheel location, which results in increased droop and may exceed the travel limitations of the ball joint.
✔ Due to the variety of manufactures and options, we cannot guarantee every tire and wheel fitment. In general, tire sizes up to 285/70/17 have fit without the need of a cab mount chop. The bumper and other related parts may need to be trimmed for tire clearance. Wheel offset recommendations: 17x9 wheel, 4.5” backspacing.
Installation Guide:
➜ AccuTune Offroad Quality: AccuTune Offroad strives to provide high quality products that look great and perform even better. These upper control arms for 05+ Tacomas are made from DOM tubing with high quality powder coat finish.
➜ Sealed Heim Joints: These high quality, American made rod ends are sourced from FK Rod Ends. These joints will withstand extreme off-road use over long periods of time. To help avoid premature wear, we've included seals that help keep debris out. These seals will help the joint last for a long time without squeaking. Heim joints at the frame pivot provides firm steering both on and off-road for controlled performance.
➜ Ball Joint with Billet Cap: A high quality all steel ball joint is used for simplicity and durability. These ball joints will hold up great under hard off-road use and have proven to withstand harsh muddy environments. Ball joints come greased ready to run out of the box. The aluminum ball joint cap is removable to access zerk fitting for greasing.
➜ 1.25 x .120 wall DOM tubing
➜ Powder coat finish
➜ Sealed 3/4″ FK Heim Joints
➜ Sealed high quality ball joint
➜ Aluminum ball joint cap included
➜ Made in the USA
➜ 3 Year/36k Mile Limited-Warranty