Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Stealth Dual Row Series 3" Light Pod
Extreme LED

Stealth Dual Row Series 3" Light Pod

$ 79.99
/

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Perfect for off-road or on-road driving visibility or as a general work light.

Our Extreme Stealth Dual Row Series LED Light Pods were made to match our Extreme Stealth Dual Row Bars perfectly, giving your rig a seamless look all around!

Light is generated via 5 - 5 watt CREE LED chips which amount to approximately 2,000 lumens of light output; meaning these pods pack a bit more punch than our Extreme Series Pods while providing the bonus of a discreet front lens.

Add these to your vehicle to give it a smooth, sleek look without sacrificing any light output.

Each pod comes with universal powder coated mounting brackets, stainless steel nuts and bolts, and has a male DT connector plug on the light that mates with the female DT connector on our wiring harness (purchased separately).

If you wish to wire the lights into your existing wiring, without our harness, you can either cut the plugs off the lights, or purchase a female DT pigtail.

The Stealth Dual Row Series 3" Light Pod comes in white color

Sold in single units, not pairs

ADDITIONALS

➤ You can add a Single Lead Wiring Harness -to control 1 Light- or a Dual Lead Wiring Harness -to control 2 Lights- 
The perfect harness for your light setup.
Make your install a snap with our plug-and-play harness. The brass grommets on the positive and negative terminals make connecting to the battery or accessory post a snap. Each harness comes with an inline fuse, a relay, and a switch. Uses DT style, waterproof plugs.
This wiring harness and switch makes wiring up your new lights a snap. Comes with everything you need. Just hook up the red wire lead to the battery and the black to a ground, then plug in the light and click the switch and your lighting up the night!
Want to run 1 or 2 lights on one switch? You can choose between a Single Lead Wiring Harness with 1 DT plug to control 1 light from a single switch and a Dual Lead Wiring Harness with 2 DT plugs to control 2 lights from a single switch.

➤ You can add 3" Colored Lens Covers
To add additional flexibility to your light.
Made from durable polycarbonate material, these lens covers have many uses:
✔ Clear - general protection to the stock light's lens.
✔ Amber - warning lights and/or fog/snow lamps.
✔ Red/Green/Blue - security/medical/emergency vehicles and hunting
✔ Black - completely black out the light if local regulations require
For use with all of our LED Lights between 2 3/4" - 3 1/2" high. Note: Best fits Extreme Pods.
Installation of these led light bar lens covers couldn't be easier. These covers quickly snap on, no screws required!

Stealth Dual Row Series 3" Light Pod Features

✔ Spot | Flood Beam (according to choice)
✔ 2,000 lumens
✔ 5 - 5w CREE LEDs
✔ Sleek Dark Lenses Give a Discreet Look
✔ Sold in single units, not pairs

Stealth Dual Row Series 3" Light Pod Specs

✔ Beam Configuration: Flood or Spot (according to choice)
✔ Harness Included: No
✔ Beam Color: White
✔ Width (In): 3
✔ Lumens: 2000
✔ LED Brand: CREE
✔ Number Of LEDs: 5
✔ Power Of Each LED (Watts): 5
✔ Total Power Input (Watts): 25
✔ Input Voltage Range: 9 - 32 volts
✔ Waterproof: IP67 Rated - 3 feet for 30 Minutes
✔ Life Expectancy Hours: 50,000
✔ Operating Temperature: -40°F to +140°F
✔ Color Temperature: 6500k
✔ Plug: DT (Deutsch Connector)

✔ Warranty: Lifetime Warranty
We are so confident in the quality of our products that we provide a lifetime warranty to protect against manufacturing defects. Continue reading for details on our limited lifetime warranty.
Our products that say "Lifetime Warranty" in the product description are covered from material or manufacturer defects, impacting the function of the light, for the life of the original purchaser. The products that carry this warranty are typically all of our lights and some other accessories (but not all). This warranty does NOT cover normal wear and tear, cosmetic damages, disassembly, unauthorized repair or attempt, or damage due to abusive use. Disassembly includes unscrewing parts of the light bar, the light bars are treated for protection from water and by disassembling you may damage the bar. 
If for any reason you need to disassemble the bar, contact us first to confirm it will not damage anything. Simply contact us and we will arrange to either fix or replace the light, if available, or we will credit you toward your next purchase if the lights are no longer carried.

✔ Return Policy: 30-day Return Guarantee
If for any reason you are not completely satisfied in the first 30 days of receiving any of our LED lights, simply return the product and as soon as we receive it, we'll process a refund for the product price excluding shipping to your delivery address.
Some of our products are offered with free shipping, so please note that if you return one of these products, our actual outbound shipping will be deducted from your return refund.
This is a period for you to evaluate the lights by simply plugging them in and testing that they will meet your needs, they should not be installed. To qualify for this return, the lights must meet the following conditions:
✔ Must be in original packaging and properly packaged (do not write on the box)
✔ Must include all parts and hardware received with your original shipment
✔ Must be unused and have no signs of usage
If items are returned without original packaging, hardware, wiring, or any other necessary parts for operation or installation, a minimum 15% restocking fee will be applied as well as any costs of damaged or missing parts. Products that have been installed or show visible use do not qualify for a return.