2005-2023 Tacoma Shock Relocation Towers 2.5 x 12" to 14" Mid Travel

NOTE: 

-REMOTE RESERVOIR ONLY, piggy back resis don't work. Order STRAIGHT hose fitting as pictured!  

-2.5x12" shocks are the best for HD springs, give the best ground clearance, HD springs max out @ 12" shock travel

-Don't mix LT and MT, true LT SUA conversions that move the springs outboard may will interfere with these axle tabs and u-bolt saddle.  

-Proper install involves setting up off of MAX bump height

Details:

✔ Puts top shock as high as possible! (3.8"+ higher than other kits)  This allows FULL bump travel, which is critical on the Tacoma.  

✔ The only kit available to fit 2.5" up to 14" travel without cutting the bed (2 holes drilled in bed shelf per side for towers to limit leverage on the frame).

✔ This "under bed" kit allows bolting to bed for less frame stress than other kits, which also allows a crossbar to be fit to lock out the frame rails from rotating inward.

✔ Laser cut from 3/16" HSLA 50,000 psi steel, CNC brake-formed towers for toughness.  Towers are blasted and powder primed for better corrosion resistance in wintery conditions.

✔ Axle tabs (included) are 1/4" HSLA for severe use and rock crawling. 

Shock info:

-Piggy back reservoirs will NOT work with these towers.

-Order Remote reservoir hose with STRAIGHT fitting perpendicular to shaft

-Mounting tabs sized for standard rod-end shocks (1.5" wide, 1/2" bolt)
-Requires min 1.50" wheel spacers with 4.75" backspacing for smooth body, Bypasses with tubes forward should go to 2.0" wheel spacers

-Ideal 3.5 or 4.0" backspacing wheel with 1.25" spacer.  Tire rubbing may be an issue otherwise   

-Designed to fit 2.5" body smooth body and bypass shocks, but 3.0" smooth body only fit

2.5" x 12" Bypass Shock Info:

 Note: We do not guarantee that all bypasses will fit due to the numerous brands and possible custom layouts you can order.  

-Many have successfully installed 2.5" bypasses, 3.0 bypass will not fit

-Best tube layout: bypass tubes placed forward towards engine, with remote hose elbow towards the rear bumper.

-We recommend only 12" travel bypasses because shock piston at normal ride height needs to be below comp. tube ports/zones    

-Bypasses require more wheel spacer, expect to need 2.0" wheel spacers, and requires extra attention and cycling checks when installing towers and axle tabs.