2005-2015 Toyota Tacoma with OEM E-Locker Nitro Gear Package, Select Ratio

*4.30 & 5.29 Use Standard Thickness Front Gearset and are designed to fit the OEM 3.90+ Carrier, models equipped with 3.73 or down will require NC-T8S-4 or ARB RD111.

*4.10, 4.56, 4.88 Use “Thick” Front Gearset and are designed to fit the OEM 3.73Carrier, models equipped with 3.91+ will require NC-T8S-3 or ARB RD121

*Carriers sold separately.

Gear Package Kit Includes:

• Nitro front ring & pinion
• Nitro front Master Install Kit
• Nitro rear ring & pinion
• Nitro rear Master Install Kit
• Front solid pre-load spacer
• Rear solid pre-load spacer

Suffering from poor performance and reduced fuel economy resulting from oversized tires?

A Nitro gears change will help get that performance and economy back! 

If you've fitted larger tires to your vehicle then you are likely experiencing a loss in performance, fuel economy, and more constant transmission gear “hunting" - This is because the larger tires reduce your engine's RPMs below the optimal power band. Re-gearing the differentials in your vehicle is the only way to get your vehicle back into its optimal operating RPM range, thus improving performance and reducing strain on your vehicle's drivetrain. This is especially important for today's vehicles as they feature tall factory gearing and overdrive transmissions which are less tolerant to an increase in tire size or the weight of added accessories. 

It's a common misconception that gear changes are reserved only to hardcore off-roaders or trucks with huge tires. However, re-gearing is one of the single most beneficial modifications you can make to keep the performance, economy, and durability of your daily-driven 4x4. This is a mod for anyone with larger tires, increased weight, or increased performance on stock vehicles for towing or increased acceleration.

Features

• 2-year warranty*
• Manufactured in South Korea 
• 8620 Steel Gear Forgings 
• Precision Machining 
• CNC Triple-lapping
• Heat Treatment
• Rockwell Hardness Tested 

Nitro Master Install Kits: 

• Koyo

Warranty Information 

*All Nitro Gear & Axle brand products are warranted to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with a copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping, or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. The warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered a defect, it is installer's responsibility to address these at the time of install. The customer is responsible for shipping charges if the warranty is granted. Warranty is for the original purchaser/user, is not transferable. The warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion – Warrantied against manufacturing defects. 2 years from the date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft/joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by a failure of other parts are not warrantable, for example, broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.