2005-2023 Toyota Tacoma Complete Crew Cab Truck Insulation Kit
Utility, workload and convenience are earmarks of the Pick Up styling. Most Pick Ups have inadequate sound and thermal insulating material built into them at the factory. You can reduce interior noise and heat in your Pick Up with one material. HushMat sound deadening and thermal insulation enhances the experience with the easiest to install sound deadening material. Your Pick Up is fun to drive, but in the summer it gets hot. If you use your light truck for work you are constantly in and out of it. There is over 200 degrees of heat cooking your firewall and floor pan. Your engine, headers, manifold and exhaust generate tremendous heat that transfers to the metal firewall and floor and this heats up your Pick Up interior. It can create a very uncomfortable ride, especially in the summer. This also forces your AC system to work harder.
HushMat automotive insulation is the solution to REDUCE thermal transfer into your interior. HushMat is proven in an independent study to lower this temperature by over 40 percent. When you drive on the highway at approximately 65 miles per hour the interior of your Pick Up is approaching 80 to 90 decibels of noise. That is like placing a vacuum cleaner or garbage disposal running on your passenger seat. When you drive on the highway and then exit. At the end of the exit ramp the first thing you do is turn down your radio or music because it was too loud. HushMat sound deadening mat leads the automotive sound deadening industry in ease of installation. Hushmat is packaged specifically for your Pick Up to provide 100 percent insulation coverage, there are no holes in the material and no puzzle pieces to put together.
Simply apply the HushMat material as shown in the Installation Guide to provide the car sound deadening and auto heat shield you deserve. Treat your firewall, doors, floor, tunnel, rear wheel wells, trunk floor and roof with this complete kit.
Fitment: 2005-2023 Toyota Tacoma
Door Installation Guide
Firewall Installation Guide
Floor Pan Installation Guide
Roof Installation Guide
Trunk Installation Guide
➜ Easiest sound deadening & insulation product to install - peel & stick
➜ Reduces heat & vibration that creates an uncomfortable ride
➜ Performs from -30 degrees up to 550+ degrees Fahrenheit
➜ Light weight & super flexible less than 1/8” thick at less than 1/2 pound per square foot
➜ Adhesion is guaranteed - No alcohol or acetone wash needed; no installation tools required
➜ Trims easily with standard razor knife or household scissors
➜ Self-Adhesive peel and stick – no glue required
➜ Installs in 1/2 the time versus offshore produced brands
➜ Manufactured in the United States of America
➜ Outperforms closest competitive brand by over 40%
➜ Original Equipment Manufacturer approved - Meets or exceeds automotive damping specs GMO149M - General Motors, WSB-M5G58-A1 - Ford and MS-CD 629 Type C – Chrysler
➜ Universal application
Reduce Heat & Road Noise all from one USA Made product!
HushMat ULTRA - Butyl Damping Pads
Hushmat Ultra Vibration Damping Properties Graph
HUSHMAT ULTRA is temperature resistant and will maintain adhesion through all automotive bake cycles including 288°C (550 degrees F) over-bake conditions. This allows its application at any stage of the production cycle. It can be applied to both pre-painted and top-coated metal surfaces. It is compatible with automotive coatings and will not contaminate spray operations. HUSHMAT ULTRA superior adhesion characteristics provide excellent corrosion resistance.
The superior adhesive properties of HUSHMAT ULTRA allow it to be used in horizontal, vertical or inverted applications. It has good conformability and can be applied on complex shapes.
HUSHMAT ULTRA is approved for many automotive specifications. Contact your Hushmat representative for details, and for design and custom application assistance.
Typical Properties
Color: Polymer - Black | Backing – Aluminum Silver or Black
Specific Gravity: 1.47 (approx. 0.60 pounds per square foot)
Thickness: 2.0mm
Hardness: 6.5 - 9.0mm. ASTM D-5
R Value: 9
Shelf Life: At least 6 months when stored at 40°C or less
Temperature Resistance: HUSHMAT ULTRA will withstand a bake of 1 hour at 240°C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions.
Cold Flexibility: Can be bent around 25mm. mandrel at -30°C with no cracking or loss of adhesion.
Flammability: Tested per FMVSS 302, HUSHMAT ULTRA is self-extinguishing and meets all aspects of the standard.
Safety: HUSHMAT ULTRA is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product.
Peel Strength: Tested in 90° peel at a crosshead speed of 300mm per minute on a 25mm wide test specimen. Average load in Newtons is reported.
