OVERVIEW

Model: 2nd Generation Toyota Tacoma • Model Years: 2005-2014

Weld on Toyota Tacoma rock sliders are the toughest there is! Feel free to abuse and use these sliders to the max. Even use them as a lifting point with your jack. Couple the weld on sliders with the DOM tubing upgrade and you have the strongest rock slider available from CBI Offroad!

Product typically ships in 6 to 8 weeks depending on options and availability.

Description

CBI Off-road rock sliders are built for the true OFF-ROAD enthusiast! Each slider is construction by one of our skilled fabricators out of Hot Rolled Electric Weld tubing (H.R.E.W. 1.75" x .120 wall), with ¼” thick mounting brackets. The included grade 8 mounting hardware make these sliders rock solid and durable to handle whatever punishment you can dish out. We offer sliders with the most evenly spaced stand offs to the frame that give them the best performance and strength compared to other manufacturers. (No long unsupported length near the back end) The rock sliders can also be used as a lifting point for a hi-lift jack and will support the full weight of the vehicle. Each slider can be ordered in a variety of configurations to meet your needs or we can custom build the perfect set for your application.

The weld on application is a more sturdy and permanent application. Due to the more permanent nature of the weld on rock sliders we recommend going with the DOM tubing upgrade. Each weld plate on  our weld on rock sliders are designed to strengthen the truck frame rather than weaken it as you weld the slider to the frame. Traditional square or rectangle weld plates from other manufacturers create weak seams in the the frame because the weld is straight. Much like a bend or curve in metal bumpers creates strength, our weld plates are "figure 8" shaped meaning there are no straight welds on the truck frame. This actually strengthens your frame rather than weaken it.

Description

DOM  (Drawn Over Mandrel) Tubing Option:

DOM is actually not a type of tubing, but a process that is applied to tubing after it is initially constructed. It is Drawn Over a Mandrel...which "cold works" it, giving it more exact dimensions relative to the inside and outside diameters, a smoother finish, and better alignment of the crystal lattice structure. Although it is almost always referred to as a SEAMLESS tube, technically it is NOT seamless tubing, and it started life as some sort of EW (electric welded) tubing. During the manufacturing process, the weld line becomes nearly undetectable, thus it is referred to as SEAMLESS. DOM round steel tube is ideal for more stressful applications requiring higher quality, increased mechanical properties, uniformity, strength, and soundness. Thus in the off-road industry DOM tubing is used in many applications from links, to roll cages, to rock sliders.

CBI Offroad recommends the DOM tubing upgrade for rock sliders for those individuals that plan on abusing their rock sliders. If hard hits and continued abuse are in your future then DOM is worth the money. If your sliders are going to be used for minimal wear, contact, and abrasion then the standard HREW will work just fine and will provide a lifetime of use. In simple terms rock crawlers should consider DOM tubing and expedition travelers should consider HREW tubing.

"Kickout" Option:

The "kickout" option for rock sliders in many cases is a very functional and usable feature along with adding to the overall look of the vehicle. The kickout is located at the rear of the slider near the rear wheel and tire. The purpose of the kickout it to help kick or push your vehicle out and away from obstacles like trees and rocks as you navigate around them. As the vehicle is pushed away from the obstacle you will create room for the tire to pass and eliminate or minimize the possibility of damage to your tire, wheel, or fender area.The kickout portion of the rock sliders sticks out 17' from the vertical side of the frame going out and away from the vehicle.

The "kickout" design can also be useful as a stepping area to access roof racks, bed racks, or other parts of the vehicle. Tacoma owners especially like the kickout to access items in the truck bed area. Toyota 4runner owners or Jeep owners may feel that the kickout design is a hindrance to the rear passengers and they enter and exit the vehicle... this should be considered for each person and your specific application and desired look.

Powder Coat Option:

While rock sliders can be sent out in bare steel for the customer to finish, many prefer the professional and finished look of powder coating. We offer a standard powder coat color of satin black with a smooth finish for our rock sliders and off-road bumpers. The powder coat finish is strong and prepared professionally to provide years of good use. The product is first sand blasted and then coated.

It is important to remember that while powder coating is a strong and durable finish it reacts in much the same way as your vehicle body paint. It will get rock chips in areas that are prone to debris coming off of the tires and it will scratch also. Powder coating can be touched up with a satin black spray paint if necessary.

Details

 

  • 1.75” x .120” H.R.E.W. Tubing
  • ¼” Mounting Brackets
  • "figure 8" weld plates
  • 4 Evenly Spaced Legs
  • Fully MIG Welded
  • Bare metal or powder coated finish
  • Weight 80 pounds (85 lbs with kickout)
  • Standard slider sticks out 14" from vertical face of frame to outside rail
  • Kickout area sticks out 17" from vertical face of frame to outside rail
  • Customizable!

2nd generation Toyota Tacoma rock sliders fit model years 2005 to 2014. Fitment is for extended/access cab and double cab models.

 

$ 559.99 - $ 859.99
Share this product on:

Recently viewed

img

Added to cart successfully!