80W-140 Nitro Para-Synthetic Plus Gear Oil, GL5 (7 Quarts)

80W-140 Nitro Para-Synthetic Plus Gear Oil, GL5 (7 Quarts)

Regular price$ 188.93

/

THIS PRODUCT IS CURRENTLY OUT OF STOCK

Friction is a killer to your moving parts. Our Para-Synthetic Plus is engineered to reduce friction with superior lubrication. Studies show it reduces your operating temperatures by up to 35%* and reducing wear as much as 25%*. Less friction means better fuel economy. There's nothing like it that will add miles to the adventure.

*Individual results may vary.

Tech note: Jeeps, & 1/2 ton trucks/SUV will require 2-3 qts for each differential whereas ¾ ton and larger truck and SUV will typically require 3-4 qts per differential. Please check with your owner's manual to ensure the proper amount of gear oil in your differential and follow manufacturer break-in procedures that usually require at least 4-6 quarts.

  • A vast reduction in the formation of deposits.
  • Better heat transfer.
  • Excellent protection to the gears and bearings even under the most extreme thermally, stressed operating conditions.
  • Less wear to gears, bearings and seals.
  • Increased oil seal life.
  • Lower operating temperatures
  • Less energy consumption
  • Longer lubricant and equipment life
  • Reduced equipment downtime and maintenance costs

*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion. 

In addition to the above conditions, see special notes for these products: 

Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs. 

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears. 

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.

 

WARNING:

This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov


Recently viewed