1995-2004 Toyota Tacoma All-Pro Baja Series Front Bumper
1995-2004 Toyota Tacoma All-Pro Baja Series Front Bumper1995-2004 Toyota Tacoma All-Pro Baja Series Front Bumper
1995-2004 Toyota Tacoma All-Pro Baja Series Front Bumper
1995-2004 Toyota Tacoma All-Pro Baja Series Front Bumper
1995-2004 Toyota Tacoma All-Pro Baja Series Front Bumper
1995-2004 Toyota Tacoma All-Pro Baja Series Front Bumper
1995-2004 Toyota Tacoma All-Pro Baja Series Front Bumper
1995-2004 Toyota Tacoma All-Pro Baja Series Front Bumper
1995-2004 Toyota Tacoma All-Pro Baja Series Front Bumper

1995-2004 Toyota Tacoma All-Pro Baja Series Front Bumper

Regular price $ 799.00 Sale price$ 679.15 Save 15%

/

As you know, the Toyota Tacoma is a superb off-road vehicle, but the stock bumper and trim are lightweight pieces that provide little or no protection to the front end of your Tacoma when you’re off-road.

All-Pro Off Road has designed a Front Winch Bumper for 1995-2004 Tacomas to protect the front end of your Toyota, improve off-road capability, and allow for the mounting of up to a 10,000-lb. capacity recovery winch with remote solenoid (use of an integrated solenoid winch will require grille trimming).

This bumper is mostly built from heavy-duty .120 wall, 1.75″ and 1.5″ diameter tubing with CNC laser cut and brake-formed 3/16″ plate steel for the winch structure and mounting plates. The sides wrap around the fenders and there’s a bottom hoop that serves as protection for the low hanging radiator with an integrated steel skid plate. All-Pro offers additional skid plates that attach to the bumper and protect the IFS and transmission (the factory skid plate is not compatible). Approach angles are greatly improved because the bumper tucks up and out of the way, providing much more clearance than the factory bumper.

The winch mounting surface has the common 10″ x 4.5″ bolt pattern used by Warn and other winch manufacturers. Tabs are included for mounting a winch fairlead.

The “Baja Taco” options may be added to the Base Model bumper to make it even more suited to the multi-purpose intent of the Baja Taco, as well as give it a mean look! Aggressively styled tubular Baja Taco Headlight Hoops act as brush guards to protect the Tacoma’s front corners when chasing through the heavy brush. Baja Taco Filler Plates are four pieces welded into the bumper between the tubes on either side to provide protection from hazards closer to the ground. If ordered with a Base Bumper, these options come installed (welded on).

Included:
Integrated skid plate
Integrated winch and fairlead mounts
(x2) Heavy duty recovery recovery points
(x2) Light mounting tabs
Lower radiator protection
Hardware
➜ Turn signal mounts are not included, but you can either re-use your stock turn signals with some simple modifications or use universal style lights available at most parts stores. Another option is to modify the factory corner lights to accept a filament bulb (1157 style) so they will function as a marker AND a turn signal light, eliminating the factory turn signal completely.

Fitment: 1995-2004 Toyota Tacoma

Please Note:
➜ The Headlight Hoops option deletes the Side Protection Hoops from the standard bumper model.
➜ Radiators on some Tacoma trucks hang below the frame and may interfere with bumper. We suggest replacing these with a shorter radiator found on the 95-06 2WD Tacoma with 2.4L.
➜ Suitable aftermarket radiators include Performance Radiator #1774, Napa #2740, or similar.
➜ The lower portion of the windshield wiper fluid tank will be visible after installation. Although this will not affect functionality, some customers find this visually objectionable. If you are concerned about the wiper fluid tank showing, we recommend you spray paint the tank with black paint or replace the tank with an aftermarket wiper tank kit in a different location in the engine compartment.
➜ Note for installation on 1998-2000 Tacoma: You will need to trim the front frame rails and weld-in the included frame brackets to install this bumper on a 1998-2000 Tacoma. Read the instructions completely before ordering.
➜ This bumper ships unpainted so that you can finish it to your liking. It simply bolts on using the factory hardware (check instructions for 98-00 models).

1998-2000 Models, Installation Guide Here

    Racing inspired “Pre-Runner” styling
    High clearance design with improved approach angles
    Completely bolt-on [except on 98-00 models - Check instructions]
    Made in the USA

    Installed Weight: 65 lbs
    Fits most 10,000-lb winches with a 4-1/2" X 10" mounting pattern


    Recently viewed