2005-2023 Toyota Tacoma Deaver H70HD Springs & Hardware
Deaver H70HD Progressive Series springs are high-quality 10-leaf units fabricated with high grade 5160 “American Made” steel designed for the Tacoma 2WD / 4WD.
A higher leaf count spring allows the use of thinner leaf material that yields a more flexible progressive leaf stack, or pyramid, producing a much smoother spring rate curve throughout the complete suspension cycle. The even, linear compression rate curve of our progressive system spring is the primary key to excellent ride quality.
Included:
✔ Deaver H70HD Leaf Springs.
✔ U Bolts.
✔ Bushing & Inner Sleeve Kit.
Fitment: 2005-2023 Toyota Tacoma 2WD / 4WD (6 Lug Model).
Please Note:
➜ Since these leaf springs convert the rear suspension to spring under you will need to weld on a new spring perch on the under side of the axle housing which is included in our rear long travel suspension kit. For maximum performance we recommend our bolt in bedcage and spec triple bypasses. This will allow for a total of 18.5" of travel and will give you a 1.5"-2" lift in the rear.
➜ Deaver springs are designed for performance and do not use an overload spring. This reduces the vehicle's tow rating. It is not recommend to tow any heavy loads with these leaf springs.
Disclaimer: All products sold or manufactured by Deaver are intended for off-road use only. Our suspension systems are not to be modified from its original design in any way. We not responsible or liable for any accidents, injuries or deaths that may occur from use of any products offered. Installation of this system will alter the center of gravity of the vehicle and may increase the risk of a roll over as compared to stock. Customer assumes all liability in assuring that parts are correctly installed and maintained.
ATTENTION STATE OF CALIFORNIA WARNING
WARNING: Cancer and reproductive harm - https://www.p65warnings.ca.gov/
